• Roof module for enhanced roof operation
• Roof operations will be controlled through the original remote control and / or the indoor roof switch
• Software can be updated in the future
• Module can easily be configured by the car's MFA - following options are available:
  • Module activation / deactivation
  • One-touch roof operation (remote / indoor roof switch)
  • Roof operation up to 45 km/h (configurable in 5 km/h steps)
  • Window position can be configured - only for roof opening - (options are: windows open / windows close)
  • Flash hazard can be activated during roof operation (only for remote operations)
  • Indoor roof switch reversing
  • Seamless roof operation:
    • roof operation will continue if you open / close the roof with the remote key and turn the ignition on/off
    • roof operation will continue if you open / close the roof with the indoor key and pull out the key
• No access through the menu in case of DIS with white illumination! - module will be delivered with standard settings

Characteristics of Comfort Module

• Due to safety concerns all operations can be interrupted
• Roof operation will resume in case of over speeding, i.e: if you start a roof operation and drive faster than the specified max speed the roof operation will automatically resume by driving less than the max speed within 10 seconds.

Specifications

Scope of delivery

• Comfort - Module
• Cables

Note

• In the standby mode, each device consumes a small amount of power. Even complex vehicle controllers should not need more than 2.0mA to avoid an empty battery after a long standing time, e.g. after a holiday. Due to quality engineering and manufacturing, this module requires less than 0.03mA.
• This device does not include any crush detection; therefore this module should only be used exercising caution and responsibility.
• Kufatec and the administrators of this website can NOT be held liable for any damage or injury caused by installing or using this product.